Shenzhen Danfore Lighting Technologies Co., Ltd.
Main products:LED Spotlight,LED Tube,LED Floodlight,LED Bulb,LED Strip
Products
Contact Us
  • Contact Person : Ms. Yang Jessie
  • Company Name : Shenzhen Danfore Lighting Technologies Co., Ltd.
  • Tel : 0086-755-22214820
  • Fax : 0086-755-22218271
  • Address : Guangdong,Shenzhen,10th Floor, Mingjun Commercial Center, Langrong Crossing, Dalang Community, Dalang Street, Bao'an District, Shenzhen, Guangdong, China (Mainland) Zip: 518000
  • Country/Region : China
  • Zip : 00000

Danfore 100lm/W Super bright E27 Par 20

Danfore 100lm/W Super bright E27 Par 20
Product Detailed
COB LED E27 1.120lm/w , high CRI is Ra 70-80 2.Size:D61*80mm 3.Beam angle :38 or 90 degrees 4.Total 620lm .

COB led Spotlight ,cob led ,cob led light

 led Spotlight Parameters

Type 5W
Voltage AC85-265V
Base PAR 20
Emitting angle 38 or 90 degrees
Bulb lifespan 35, 000 hours
Colors Warm white, cold white
Total Lumen 620lm
LED chipCOB
Warranty 2 years
Model DF-PAR20-COBB05

 led Spotlight Lighting Effect

 led Spotlight Features

  

 1.No ultraviolet and infrared ray, and no mercury.

2. Greatly reduce energy consumption and operating cost

3.With the aluminum substrate have good thermal radiation.

4. Long span life

5.Low lumen depreciation

  115lm/W HIGH CRI 70-80 Super bright COB led Spotlight 6.Full range of colors

7.Brighter than traditional fluorescent lamps

8.Dimmable

9.Direct replacement for PAR20 bulb

 led Spotlight Application

1.Spot lighting

2.Architectural Lighting

3.Display case accent

4.Reading Light

5.Biological lighting

led Spotlight Installtion

1.Remove the non-functioning bulb from its socket. This can usually be done by removing a retaining clip with your fingers, then removing the UV-coated circular glass pane. After the UV glass pane is removed, you can pull the bulb and wiring harness from the housing. Remove the bulb by pulling it away from the harness with one hand while holding on to the harness with the other.

2. Insert the new bulb by pressing the two exposed pins on the rear of the bulb into the two holes in the harness.

3. Replace the bulb and harness into the housing, then replace the glass pane and retaining clip.

led Spotlight  Packing

 LED Par light Photos

Par 20

Par38

Danfore Company Information 



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.